When should I use this guide?
Use this guide when you want to:
see how the company's machines are distributed across different statuses
show machines with a specific status on the map
find a machine and open its machine card
distinguish status filtering from the standard map filters
Requirements
You need access to Infobric Machines on the web. No specific role or package is required. Statuses and counts are based on the company's current machine data and may change.
How to do it
Open the status panel
Open Home in Infobric Machines.
Select Status.
The status panel is displayed over the map. You can collapse it to make more room for the map. When collapsed, the panel shows the total number of machines and places. Statuses and counts update as soon as new information is available.
Filter the map by status
Select the status card you want to display.
The map shows machines with the selected status.
Only one status filter can be selected at a time. Selecting another status card replaces the previous selection. Select the active card again to reset the status filter. If you select a status with a count of 0, no machines are shown on the map.
Places remain on the map when machines are filtered. The standard Filter control is disabled while a status filter is selected. The status panel continues to show every status and its total count.
Understand the machine statuses
Machine on â The engine is running.
Production on â Receiving production signal.
Machine off â No engine or production signal.
No GPS connection â The GPS position is more than 4 hours old.
Fast movement â The machine is moving at more than 30 km/h.
Active â Position only.
Disconnected machine â The device is not connected to a machine.
The count beside each status is based on the company's machine data and is not a fixed value.
Filter by low battery or service
Low battery and Service work like the other status cards:
Low battery shows machines below the customised battery threshold.
Service shows machines due for service within the next 30 days.
Select the active card again to reset the filter.
Use map pins and machine cards
Map pins use colours that correspond to machine statuses. A smaller symbol on the pin can indicate battery or service. When you hover over a map pin, it shows the field selected for display. You can select one field at a time.
Select a machine pin to open the machine card on the same page. Closing the machine card returns you to the map without changing the machine's data.
Search for a machine
Use the map search to search by:
name
internal ID
category
The result list shows matching machines. The map does not change until you select a result.
Use the standard map filters
The standard map Filter is separate from the status panel. You can use it to:
show or hide Worksite and Depot
filter machines by Category, Tags and Home depot
The standard Filter is disabled while a status filter is selected. Reset the status filter before opening it.
If it does not work
First, check that:
you have opened Home â Status
you have selected a search result if the map does not change after a search
you have reset the selected status card if the standard Filter is disabled
Status counts depend on the company's current machine data and may differ from examples and screenshots.
Tips
Collapse the status panel when you need more space on the map.
Use the map-pin colours to distinguish machine statuses quickly.
Places remain on the map when machines are filtered by status.-